B&K Precision 2532B - Manual - Manual (Page 15)

15
Display Information
Figure 4 - Display Screen
1. Trigger status
• Armed - The oscilloscope is acquiring pre-trigger data.
All triggers are ignored in this state.
• Ready - All pre-trigger data has been acquired and the
oscilloscope is ready to accept a trigger.
• Trig’d - The oscilloscope has seen a trigger and is
acquiring the post-trigger data.
• Stop - The oscilloscope has stopped acquiring waveform
data.
• Auto - The oscilloscope is in auto mode and is acquiring
waveforms in the absence of triggers.
• Scan - The oscilloscope is acquiring and displaying
waveform data continuously in scan mode. This mode