B&K Precision 2532B - Manual - Manual (Page 128)

128
Recall waveforms form USB flash drive, follow next steps:
1. Press the “SAVE/RECALL” button.
2. Press the “Type” button to select “Waveforms”.
3. Insert USB flash drive to USB host port of the oscilloscope and
wait until the oscilloscope has initialized USB flash drive (about
ten seconds).
4. Press the “Save to” option button to select “File”.
5. Press the “Save” option button then go into the Save/Recall
interface.
6. Choose the file you want then press the “Load” option button
(about five seconds, there is a prompting message showing “Recall
data success” displaying on the screen), now waveform data have
been recalled from USB flash drive.
Save Picture
Waveform interface image can be saved to USB flash drive, but they
cannot be recalled. Images can be opened on a computer.
Table 46 - Picture Storage Function Menu
Option Setting Introduction
Type Pictures Menu for the Storage/Recall waveform
interface image.
Print Key Print Picture Not available