B&K Precision 2532B - Manual - Manual (Page 69)

69
Figure 34 - Video Trigger Screen
Table 18 - Functional Menu of Video Trigger 2
Option Setting Instruction
Type Video When you select the video
type, put the couple set to
the AC, then you could
trigger the NTSC,PAL and
SECAM video signal.
Standard
NTSC
Pal/Secam Select the video standard for sync
and line number count.
Mode Auto Use this mode to let the
acquisition free-run in the absence
of a valid trigger.
Normal Use this mode when you want to
see only valid triggered
waveforms; when you use this
mode, the oscilloscope does not
display a waveform until after the
first trigger.
Single When you want the oscilloscope
to acquire a single waveform,
press the “SINGLE ”button.
Set up Enter the “Trigger setup menu”.