B&K Precision 2532B - Manual - Manual (Page 33)

33
Channel Function Menu
Table 3- Channel Function Menu
Option Setting Introduction
Coupling DC
AC
GND
DC passes both AC and DC components of the
input signal.
AC blocks the DC component of the input
signal and attenuates signals below 10 Hz.
GND disconnects the input signal.
Volts/Div Coarse
Fine
Selects the resolution of the Volts/Div knob
Coarse defines a 1-2-5 sequence.
Fine changes the resolution to small steps
between the coarse settings.
Probe 1X
5X
10X
50X
100X
*ISFE
500X
1000X
Set to match the type of probe you are using to
ensure correct vertical readouts.
*Reserved for future use.
Next Page Page 1/2 Press this button to enter second page menu.