B&K Precision 2532B - Manual - Manual (Page 178)

178
(Both channels in same V/div
setting)
Probe attenuator
1X, 10X
Probe attenuation selectable
factors
1X, 10X, 100X, 1000X
Vertical System
Vertical Sensitivity 2 mV/div – 10 V/div (1-2-5 order)
Channel voltage offset range 2 mV–100 mV: ±2 V
102 mV – 10 V: ±40 V
Vertical Resolution 8 bit
Channels 2
Analog
Bandwidth 25 MHz 40 MHz
Single-shot
Bandwidth 25 MHz 40 MHz
Lower frequency limit (AC -
coupled)
≤10 Hz (at input BNC)
DC Gain Accuracy < ± 3.0%: 10 mV/div to 10 V/div in
fixed gain ranges
< ± 4.0%: 2 mV/div , 5 mV/div and
variable gain ranges
DC Measurement Accuracy:
All Gain settings
≤100mV/div
± [3%*(|reading|+|offset|)+1% *|offset|
+0.2 div+2 mV]
DC Measurement Accuracy:
All Gain settings
>100mV/div ± [3%*(|reading|+|offset|)+ 1%* offset|
+0.2 div+100 mV]
Rise time <14 ns <8.8 ns
Overshoot, Typical
(using 500 ps pulse) <10% with probe or BNC input w/ 50
Ohm feed thru
Math operation +, -, *, /, FFT
FFT Window mode: Hanning, Hamming,
Blackman, Rectangular
Sampling points: 1024