B&K Precision 2532B - Manual - Manual (Page 162)

162
Taking Cursor Measurements
You can use the cursors to take time and voltage measurements of a
waveform quickly.
Measuring Ring Frequency
To measure the ring frequency at the rising edge of a signal, follow these
steps:
3. Press the “CURSORS” button to see the “Cursor Menu”.
4. Press the “Mode” button to select “Manual”.
5. Press the “Type” option button and select “Time”.
6. Press the “Source” option button and select“CH1”.
7. Press the “CurA” button and turn the universal knob to place the
cursor A on one peak of the ring.
8. Press the “Cur B” button and turn the universal knob to place the
cursor B on the nearest peak of the ring.
You can see the delta time and frequency (the measured ring frequency) on
the top left of the screen.