B&K Precision 2532B - Manual - Manual (Page 130)

130
4. Insert USB flash drive to USB host port of the oscilloscope and
wait until the oscilloscope has initialized USB flash drive (about
five seconds).
5. Press the “Print Key” option button to select “Save Picture”.
6. Press the “Save” option button then go into the Save/Recall
interface”.
7. Press the “Save” button then you’ll go into the Save/Recall
interface
8. Create the picture name then press the “Confirm” button (about
five seconds, there is a prompting message showing “Save data
success” displaying on the screen), now picture data have been
saved to USB flash drive.
Save/Recall CSV
Table 47 - CSV Storage Function Menu
Option Setting Introduction
Type CSV Menu for the Storage CSV file to USB
flash drive.
Data Depth Displayed
Maximum Set to store displayed waveform data to
CSV file.
Set to store maximum waveform data to
CSV file.
Para Save On
Off Set whether store parameters to CSV
file or not.
Save Go to the Save/Recall interface.