B&K Precision 2532B - Manual - Manual (Page 64)

64
Operating Instructions:
1. Set up Type
1) Press the “TRIG MENU” button to display “Trigger”
menu.
2) Press the “Type” option button to select “Edge”.
2. Set up Source
According to input signal, press the “Source” option button to
select “CH1”, “CH2”, “EXT”, “EXT/5”or “AC Line”.
3. Set up Slope
Press the “Slope” option button to select “ ” , “
” or “ ”.
4. Set up Trigger mode
Press the “Trigger mode” option button to select “Auto”,
“Normal”, “Single”.
Auto: The waveform refresh at a high speed whether the
trigger condition is
satisfied or not.
Normal: The waveform refresh when the trigger
condition is satisfied and waits for next trigger event
occurring when the trigger condition is not satisfied.