Hydrotech Precision-PWS 8-5 OWNERS GUIDE - Manual (Page 17)

17
Shipping Tie Removal Diagram
4. Refer to Shipping Tie Removal Diagram above. Cut/Remove the
shipping tie located on the top of the water distiller head. Be careful not to
scratch the water distiller when removing. This tie supports the cooling
coil during shipping only.
(A) (B)
TOOLS REQUIRED:
For Water Distiller Installation
(A) #2 Phillips screwdriver
(B) Slotted screwdriver
Water Distiller Installation Tools
COIL SUPPORT TIE
WATER DISTILLER HEAD