Hydrotech Precision-PWS 8-5 OWNERS GUIDE - Manual (Page 39)

39
1. Make sure the water distiller is cool before starting.
Water Distiller Head, Filter Canister and Storage Tank Steam Sterilization
Diagram
2. Refer to the Water Distiller Head, Filter Canister and Storage Tank
Steam Sterilization Diagram above. Lift the front corner of the water
distiller head.
3. Remove the charcoal filter canister. Remove all charcoal and rinse until
clean. Replace empty filter canister between water distiller head and
storage tank
4. Place a container under the front storage tank sight gauge valve and leave
the valve in the open position.
Steam Sterilization of Water Distiller Head, Filter Canister and
Storage Tank
NOTE: If Water Distiller is filled manually, fill the boiling tank with water to
the bottom of the water gauge pin.
BULKHEAD, 3/8"JG
(INSIDE DISTILLER)
TUBE, SS, 3/8" X 1-1/2"
FILTER CAP
CHARCOAL FILTER
CANISTER BODY