Hydrotech Precision-PWS 8-5 OWNERS GUIDE - Manual (Page 28)

28
Power – ON/OFF
Fan – ON/OFF
Water – ON/OFF
NOTE: A clicking sound may be heard if the Water distiller is plugged into
the wall electrical outlet, the power and water switches are in the ‘ON’
position and the boiler is empty. The clicking sound is the internal water
solenoid valve activating.
- White indicator light.
- Normally ON when water distiller is operating with
automatic feed water supply line. Will automatically fill
the boiler tank from the water supply line.
- Top square indicator light is illuminated whenever the
switch is on. It will remain illuminated even when the
water distiller is not operating.
- Bottom rectangular indicator light is illuminated only
when the water is entering the boiling tank. The boiler
will fill with water until the upper boiler water level is
achieved.
- Red indicator light.
- Normally ON when water distiller is operating.
Controls power to the entire water distiller.
- Top square indicator light is illuminated whenever the
switch is on. It will remain illuminated even when the
water distiller is not operating.
- Bottom rectangular indicator light is illuminated only
when the heating element in the boiler is on.
- Turn power switch to OFF to stop Water distiller
operation.
- Amber indicator light.
- Normally ON when water distiller is operating.
Controls power to the cooling coil fan.
- Top square indicator light is illuminated whenever the
switch is on. It will remain illuminated even when the
water distiller is not operating.
- Bottom rectangular indicator light is illuminated only
when the fan is on. Fan should be running if the water
distiller is distilling water.
- Turn Fan Switch to OFF only when performing a
steam sterilization of the water distiller.
(O
N
P
O
S
IT
IO
N
)
P
O
W
E
R
(O
N
P
O
S
IT
IO
N
)
FA
N
W
A
T
E
R
(O
N
P
O
S
IT
IO
N
)