Hydrotech Precision-PWS 8-5 OWNERS GUIDE - Manual (Page 32)

32
Introduction
The purpose of purchasing a water distiller is so you will not have to drink
the impurities in your drinking water. A water distiller effectively removes the
impurities and chemicals from your water and returns the taste of pure water so
that it is pleasing and healthy to drink for the entire family.
It is important to also keep the water distiller clean so that it can perform
properly and efficiently. Regular cleaning and maintenance will allow the water
distiller to continually provide pure water for a very long time.
Regular Inspection and Cleaning of the Boiling Tank
1. To prevent a build up of scale and contaminants in the boiling tank, it is
recommended that the impurities from the boiling tank be drained after
each distillation process or ten gallons of distilled water. There may be an
off colour line at the seams of the boiler tank, this is caused by the TIG
welding process used during manufacturing. This is normal and is not a
sign of any concern.
Manual Drain Valve Location Diagram
2. Refer to the Manual Drain Valve Location Diagram above. The water
distiller boiling tank can be drained by opening the ball valve and draining
into a suitable floor drain or container (ball valve is shown in the open
position).
Maintenance and Cleaning
NOTE: Regular Cleaning is much easier than trying to clean after a
prolonged period of time!
TO SEWER
DRAIN ELBOW ASSEMBLY
GEAR CLAMP
TUBE