Hydrotech Precision-PWS 8-5 OWNERS GUIDE - Manual (Page 25)

25
1. Remove any protective plastic coating (white, blue or clear plastic) from
the lid.
Boiling Tank Lid Operation Diagram
2. Refer to the Boiling Tank Lid Operation Diagram above. Take the
boiling tank lid in your hand. Hold the Tee Bar bracket and turn the Lid
Knob counter-clockwise so that there is ½” of space between the Tee Bar
bracket and the lid.
3. Tip the lid so that the Tee Bar bracket slips under the rim of the boiling
tank opening on one side, and then slide the lid so the Tee Bar bracket
slips under the other side of the rim. Center the lid.
4. Turn clockwise to tighten the lid onto the boiling tank. The water level pin
inside the boiling tank will prevent the lid from turning while tightening.
Practise removing and replacing the lid a few times as the lid will need to
be removed each time the water distiller is cleaned.
Boiling Tank Lid Installation