Hach-Lange SC 1000 - Manual (Page 108)

106
Advanced Operations
6.3.3.11 Function set to SYSTEM ERROR working mode
Figure 65 Timer mode—Relay behavior
1 OFF Duration 3 OFF Delay
2 Duration 4 Time (x-axis)
Table 37 Color/line code for Figure 65
Relay contact (DUTY CYCLE=DIRECT)
Relay contact (DUTY CYCLE=REVERSE)
SYSTEM ERROR
WARNING LIST
Default value: DISABLED
ENABLED: Monitors the internal warning bits of every probe.
DISABLED: Monitoring is disabled.
ERROR LIST
Default value: DISABLED
ENABLED: Monitors the internal error bits of every probe.
DISABLED: Monitoring is disabled.
SENSOR MISSING
Default value: DISABLED
Monitors the connection of every connected probe.
ENABLED: Monitoring is active.
DISABLED: Monitoring is not active.
ON DELAY
(0 s–999 s) Default value: 5 seconds
Sets a delay for the relay to turn on.
OFF DELAY
(0 s–999 s) Default value: 5 seconds
Sets a delay for the relay to turn off.