Hach-Lange SC 1000 - Manual (Page 62)

60
Standard Operations
To set the date and the date format:
1. Select sc1000 SETUP, DISPLAY SETTINGS, DATE/TIME.
2. Select FORMAT . From the list box, select the date format to be displayed and press
the ENTER button to confirm.
3. Select DATE . The keypad is displayed.
4. Enter the date using the keypad and press ENTER to confirm.
5.9 Set up system security (passcode protection)
By setting a passcode the sc1000 controller restricts unauthorized access. The passcode
can include up to 16 digits (alpha and/or numeric and available characters). The
passcode protection is activated as soon as the sc1000 controller is in measurement
mode. The passcodes can be entered as a log on passcode when accessing the sc1000
controller with a web browser access or GSM modem. By default no passcode is set.
There are two passcode options:
MAINTENANCE
The Maintenance passcode protects the Device Management and Security Setup menus.
MENU PROTECTION
Some probes allow to protect some menu categories (eg calibration, settings, etc.) by the
Maintenance passcode. This menu shows all probes which support this feature.
Select a probe, than select the menu categories which you want to protect by the
Maintenance passcode.
SYSTEM
The System passcode is the master passcode and protects the complete sc1000 Setup
menu. A user with a maintenance passcode cannot delete or edit a system passcode.
The System passcode can be entered at any sc1000 controller log on screen.
5.9.1 Set the passcode
To enter a passcode:
1. Select sc1000 SETUP, SYSTEM SECURITY.
2. Select Maintenance or System.
3. Press ENTER .
4. Enter a passcode.
5. Confirm with ENTER .
5.10 Add and remove favorites
The sc1000 controller stores a maximum of 50 favorites (bookmarks). A favorite is a
saved menu item and makes it easy to return to. Favorites can be added to a favorite list
and accessed at any time in the Main Menu. Favorites are listed in the order as they were
created.