5 gsm module, Minimum, Figure 67 – Hach-Lange SC 1000 User Manual
Page 112: Shows, Advanced operations 6.3.5 gsm module
110
Advanced Operations
6.3.5 GSM module
The GSM Module menu contains all settings which are needed for remote communication
(dial-up) between the sc1000 controller and a computer.
For more detailed information refer to
Note: This menu is displayed only if a GSM modem is installed in the sc1000 controller
TEST/MAINT
Default value: DISABLED
This menu works independently from the simulation.
DISABLED: Normal operation mode
ENABLED: Sets the TEST/MAINT bit (0x0040) of every status register of every configured slave
to indicate the “Service” mode.
VERSION
Displays the current software version of the Modbus network adapter card.
LOCATION
Displays the current location.
sc1000 SETUP
NETWORK MODULES
FIELDBUS
Figure 67 Modbus simulation mode
1
Time (x-axis)
4
Minimum
2
Period
5
Maximum
3
Period
6
Simulated value (y-axis)
Table 39 Color/line code for
First floating point value