3 panel mounting, 4 sun-shield, 3 wiring safety information – Hach-Lange SC 1000 User Manual
Page 15: 3 panel mounting 3.2.4 sun-shield
13
Installation
3.2.3 Panel Mounting
Refer to the instruction sheet supplied with the mounting hardware for installation
instructions.
3.2.4 Sun-shield
The optional sun-shield is highly recommended for all outdoor installations. Refer to the
instruction sheet supplied with the sun-shield for installation instructions.
3.3 Wiring safety information
When making any wiring connections to the sc1000 Controller, the following warnings
and notes must be adhered to, as well as any warnings and notes found throughout the
individual installation sections. For more safety information refer to
Remove the display module before performing any wiring tasks (
Figure 5
).
D A N G E R
Electrocution hazard. Always disconnect power to the instrument when making electrical
connections.
Figure 5 Remove display module and probe module cover
1
Probe module cover
3
Connector, display module
2
Display module
4
Screw (4Ч)