Figure 56, Advanced operations – Hach-Lange SC 1000 User Manual
Page 93
Advertising
91
Advanced Operations
Figure 56 Relay behavior, Feeder Control mode
1
Deadband (Phase=Low)
5
ON delay (with phase set low)
OFF delay (with phase set high)
2
Deadband (Phase=High)
6
Time (x-axis)
3
Set point
7
Source (y-axis)
4
OFF delay (with phase set low)/
ON delay (with phase set high)
Table 29 Color/line code for
Selected source
Relay contact (phase low)
Relay contact (phase high)
Advertising