Hach-Lange SC 1000 - Manual (Page 13)

11
Section 3 Installation
3.1 Mechanical installation
3.2 Mounting the controller
3.2.1 Wall mounting
Leave a minimum of 5 cm (2 in.) of space at the top and sides for cooling purposes and
display module installation. Leave a minimum of 15 cm (6 in.) of space underneath for the
cable connections. Refer to
Figure 3 for proper wall mounting dimensions.
1. Install four bolts into the wall.
2. Hang the sc1000 controller over the bolts and attach the supplied washers and
hand-tighten the two bottom bolts.
D A N G E R
Only qualified personnel should conduct the tasks described in this section of the manual.
Figure 2 Probe module with display module
1 Probe module 3 Display module
2 LED indicator 4 Connector, display module to probe module