Hach-Lange SC 1000 - Manual (Page 32)

30
Installation
Figure 20 Relay card (old version, discontinued in 2008)
1 Terminal Block–Refer to Table 3 for terminal assignments.
Table 3 Relay card (old version, discontinued in 2008) terminal assignments
Terminal Designation Relay 1–4
1
Relay 1 (normally closed contacts)
Maximum switching voltage:
250 VAC;
125 VDC
Maximum switching current:
250 VAC, 5 A
125 VAC, 5 A
30 VDC, 5 A
Maximum switching power:
1500 VA
150 W
2
3
Relay 2 (normally closed contacts)
4
5
Relay 3 (normally closed contacts)
6
7
Relay 4 (normally closed contacts)
8
Figure 21 Relay card (YAB076, change over)
1 Conductor (Pull to remove from the board, when wiring
outside devices to terminal connectors) 4 Relay 6
2 Relay 1 5 Relay 12
3 Relay 7 6 Terminal Block – Refer to Table 4 for terminal
assignments