Luminex 100 IS Version 2.3 - Manual (Page 130)

Luminex 100 IS User Manual Version 2.3
x
MAP Technology
5 - 88 PN 89-00002-00-072 Rev. C
Figure 5-57. Report Selection Dialog Box
2. Select the type of report that you want to print and click Next.
For the Analyte, Clinical Patient, and Batch Summary Reports,
the Batch Selection dialog box opens. Select the batch to print.
See Figure 5-58. For the Quality Control, Maintenance,
Calibration Trend, and System Control Trend Reports, a dialog
box related to the specific report opens. The system information
may vary depending on the type of report you select.
Figure 5-58. Batch Selection Dialog Box
3. Enter the information (in this example, a patient report) and click
Next. Another information dialog box opens. Enter specific
information for the type of report the system is compiling.
Figure 5-59 shows a Patient Selection example.