Luminex 100 IS Version 2.3 - Manual (Page 198)

Luminex 100 IS User Manual Version 2.3
x
MAP Technology
B - 16 PN 89-00002-00-072 Rev. C
Figure B-15 Luminex 100 IS 2.3 Startup Splash Screen
4. At the Luminex 100 IS Setup—Welcome dialog box, click
Next to continue.
5. At the Luminex 100 IS Setup—License Agreement dialog box,
read the End-User License Agreement (EULA). Use the scroll
bar to display all the text. Click Yes to continue.
6. At the Luminex 100 IS Setup—InstallShield Complete dialog
box, remove any floppy disks from their drives and click Finish.
The system restarts Windows and auto starts the Luminex 100 IS
software.
The first time Luminex 100 IS starts up it displays the End-User
License. To continue click Accept. Uncheck the Show Next
Time checkbox to bypass this dialog box on the next startup. If
you click Decline the application closes.
Verify Successful
Upgrade
1. Start up software. The main screen of the IS software appears.
2. Verify software upgrade information. From the Help menu, click
About the Software. The About Luminex 100 IS Software
dialog box opens. Verify that the version number on your screen
begins with 2.3, as shown in Figure B-16. The numbers after the
2.3 do not need to match those in Figure B-16.
Note: If the system displays a blank
screen after it has rebooted, press
Alt+Tab
on the keyboard to display
the software on the monitor.