Luminex 100 IS Version 2.3 - Manual (Page 17)

PN 89-00002-00-072 Rev. C 2 - 1
Safety
Symbols
Please become familiar with the information in this chapter before
using the equipment. Do not perform procedures on your Luminex
100 IS 2.3 system that are not specifically contained in this manual,
unless you are directed to do so by Luminex Technical Support.
These symbols describe warnings, cautions, and general information
used in the operation of this instrument. These symbols are further
defined under “Safety Precautions.”
2
Number Symbol Description Number Symbol Description
1 Alternating current (ac) 7 Warning (refer to manual)
2 Protective ground 8 Warning (refer to manual)
3 On 9 Warning (refer to manual)
4 Off 10 Warning (refer to manual)
5 SN Serial number 11 Warning (refer to manual)
6 Warning (refer to manual)