A.5 status commands, A.5.1 read_failed_contact_counter, A.5.2 reset_failed_contact_counter – Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual User Manual

Page 114: A.6 hci testing commands, A.6.1 enable_device_under_test_mode, A.6.2 read_loopback_mode, Status commands, Hci testing commands, Enable_device_under_test_mode read_loopback_mode

Advertising
A.5 status commands, A.5.1 read_failed_contact_counter, A.5.2 reset_failed_contact_counter | A.6 hci testing commands, A.6.1 enable_device_under_test_mode, A.6.2 read_loopback_mode, Status commands, Hci testing commands, Enable_device_under_test_mode read_loopback_mode | Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual User Manual | Page 114 / 336 A.5 status commands, A.5.1 read_failed_contact_counter, A.5.2 reset_failed_contact_counter | A.6 hci testing commands, A.6.1 enable_device_under_test_mode, A.6.2 read_loopback_mode, Status commands, Hci testing commands, Enable_device_under_test_mode read_loopback_mode | Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual User Manual | Page 114 / 336
Advertising
See also other documents in the category Teledyne LeCroy Equipment: