Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 273)

255
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
L2CAPConnectResponse
L2CAPConnectResponse(Response)
Return value
• “Success”
• “Failure”
Comments
This command is used to send an automatic response to an incoming
L2CAP connection request. Execute this command before an incoming
connection request.
Example
L2CAPConnectResponse("Reject_No_Resources");
L2CAPDeregisterAllPsm
L2CAPDeregisterAllPsm()
Return value
• “Success”
• “Failure”
Comments
This command is used to deregister all registered PSMs identifiers with
L2CAP
Example
result = L2CAPDeregisterAllPsm();
Trace("DeregisterAllPsm : ", result, "\n");
Parameter Meaning Default Value Comments
Response “Accept” Possible values:
“Accept”
“Reject_Pending”
“Reject_PSM_Not_Supported”
“Reject_Security_Block”
“Reject_No_Resources”
Parameter Meaning Default Value Comments
N/A