A.1.20 set_connection_encryption, A.2 hci link policy commands, A.2.1 get_park_mode – Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual User Manual
Page 94: A.2.2 exit_sniff_mode, A.2.3 hold_mode, Set_connection_encryption, Hci link policy commands, Get_park_mode exit_sniff_mode hold_mode
76
CATC BTT
RAINER
2.20
A
PPENDIX
A
User’s Manual
A.1.20 Set_Connection_Encryption
Set_Connection_Encryption is used to enable and disable the link-level encryption.
A.2 HCI Link Policy Commands
A.2.1 Get_Park_Mode
Stops park mode and enters active mode for the specified ACL link.
A.2.2 Exit_Sniff_Mode
Stops Sniff mode and enters active mode for the specified ACL link.
A.2.3 Hold_Mode
Places the specified ACL link into Hold Mode.
Command Parameters
Examples
Comments
HCI_Handle
0x0001
Encryption_Enable
1
Range: 0 or 1
Return Events
Set_Connection_Encryption_Complete
Set_Connection_Encryption_Error
Command Parameters
Examples
Comments
HCI_Handle
0x0001
Return Events
Mode_Change
Exit_Park_Mode_Error
Command Parameters
Examples
Comments
HCI_Handle
0x0001
Return Events
Mode_Change
Exit_Sniff_Mode_Error
Command Parameters
Examples
Comments
HCI_Handle
0x0001