A.3.22 read_pin_type, A.3.23 read_scan_enable, A.3.24 read_sco_flow_control_enable – Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual User Manual
Page 103
85
CATC BTT
RAINER
2.20
A
PPENDIX
A
User’s Manual
A.3.22 Read_PIN_Type
Read_PIN_Type will read the PIN type specified in the host controller of BTTrainer.
A.3.23 Read_Scan_Enable
Read_Scan_Enable will read the value for the Scan_Enable configuration parameter, which
controls whether or not BTTrainer will periodically scan for page attempts and/or inquiry
requests from other Bluetooth devices.
A.3.24 Read_SCO_Flow_Control_Enable
The Read_SCO_Flow_Control_Enable command provides the ability to read the
SCO_Flow_Control_Enable setting. By using this setting, BTTracer can decide if the
BTTrainer Host Controller will send Number Of Completed Packets events for SCO
HCI_Handles.
Command Parameters
Examples
Comments
N/A
Return Events
Read_PIN_Type_Complete
Read_PIN_Type_Error
Command Parameters
Examples
Comments
N/A
Return Events
Read_Scan_Enable_Complete
Read_Scan_Enable_Error
Command Parameters
Examples
Comments
N/A
Return Events
Read_SCO_Flow_Control_Enable_Complete
Read_SCO_Flow_Control_Enable_Error