Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 144)

126
CATC BTT RAINER 2.20 A PPENDIX A
User’s Manual
A.14 OBEX Command Descriptions
A.14.1 ClientAbort
A.14.2 ClientConnect
This command will create an OBEX connection with a remote device.
A.14.3 ClientDisconnect
This command will cause the remote device to close the established OBEX channel.
A.14.4 ClientGet
This command will initiate an OBEX Get operation in the remote device for the object
named in the store handle. This operation is only valid over an OBEX connection.
Command Parameters Examples Comments
NA .
Command Parameters Examples Comments
BD_ADDR 0x010203040506 An HCI Connection has to be
established before calling this
command.
Return Events
ClientConnect_Complete
ClientConnect_Error
Command Parameters Examples Comments
N/A
Return Events
ClientDisconnect_Complete
ClientDisconnect_Error
Command Parameters Examples Comments
Object “VCard.vcf”
Return Events
ClientGet_Complete
ClientGet_Error