Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 229)

211
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
HCIWriteEncryptionMode
HCIWriteEncryptionMode(EncryptionMode)
Return value
• “Success”
• “Failure”
• “Invalid parameter”
Comments
Controls whether the local device requires encryption to the remote device
at connection setup.
Example
result = HCIWriteEncryptionMode(0);
HCIWriteLinkPolicySettings
HCIWriteLinkPolicySettings(Address, LinkPolicySettings)
Parameter Meaning Default Value Comments
Encryption
Mode
Encryption
mode:
0 = Encryp-
tion disabled;
1 = Encryp-
tion enabled
for
point-to-point
packets only;
2 = Encryp-
tion enabled
for both
point-to-point
and broadcast
packets;
3-255=Reserv
ed
0
Parameter Meaning Default Value Comments
Address Bluetooth
address of
device in
question
LinkPolicy
Settings
Range is 0x0000-0x8000.