A.7.15 catc_read_headset_gain, A.7.16 catc_read_link_key_type, A.7.17 catc_read_pin_response_enable – Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual User Manual
Page 122: A.7.18 catc_read_revision_information, A.7.16 catc_read_link_key_type
104
CATC BTT
RAINER
2.20
A
PPENDIX
A
User’s Manual
A.7.15 CATC_Read_Headset_Gain
Reads the gain of the microphone or speaker of the headset.
A.7.16 CATC_Read_Link_Key_Type
Reads Link Key Type.
A.7.17 CATC_Read_PIN_Response_Enable
Read the global flag for allowing PINs to be sent to requesting devices during
authentication.
A.7.18 CATC_Read_Revision_Information
BTTrainer uses this command to read the revision number of the BTTrainer baseband
controller.
Command Parameters
Examples
Comments
Device
“Speaker”
“Microphone” or “Speaker”
(“Speaker” is default)
Return Events
CATC_Read_Headset_Gain_Complete
CATC_Read_Headset_Gain_Error
Command Parameters
Examples
Comments
N/A
Command Parameters
Examples
Comments
NA
Command Parameters
Examples
Comments
N/A
Return Events
CATC_Read_Revision_Information_Complete
CATC_Read_Revision_Information_Error