Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 117)

99
CATC BTT RAINER 2.20 A PPENDIX A
User’s Manual
Used in Test Cases
A.7.5 CATC_Get_Selected_Sco_Connection
This command will return parameters for currently selected SCO connection.
A.7.6 CATC_Increase_Power_Request
This command will send LMP_Incr_Power_Req PDU to the remote device predefined
number of times.
Used in Test Cases
Test Case Description
TP/LIH/BV-26-C Need to exit park mode by sending LMP_unpark_BD_ADDR_req.
Command Parameters Examples Comments
N/A
Return Events
Command Complete: Will return after the operation has completed.
Command Parameters Examples Comments
HCI_Handle
Return Events
Command Status: Will return after the operation has started.
Command complete: Will return after the operation has completed.
Test Case
TP/INF/BV-14-C
TP/LIH/BV-36-C