A.1.10 inquiry, A.1.11 inquiry_cancel, A.1.12 periodic_inquiry_mode – Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual User Manual
Page 90: Inquiry inquiry_cancel periodic_inquiry_mode
72
CATC BTT
RAINER
2.20
A
PPENDIX
A
User’s Manual
A.1.10 Inquiry
Inquiry will cause BTTrainer to enter Inquiry mode and discover other nearby Bluetooth
devices.
A.1.11 Inquiry_Cancel
Inquiry_Cancel will cause BTTrainer to stop the current Inquiry if the Bluetooth device is
in Inquiry mode.
A.1.12 Periodic_Inquiry_Mode
Periodic_Inquiry_Mode is used to configure BTTrainer to perform a periodic Inquiry based
on a specified period range.
Note: Max_Period_Length > Min_Period_Length > Inquiry Length.
Return Events
Success
Failure: Device not found
Failure
Command Parameters
Examples
Comments
LAP
Inquiry_Length
8
Num_Responses
10
Return Events
Inquiry_Complete
Inquiry_Result
Inquiry_Error
Command Parameters
Examples
Comments
N/A
Return Events
Inquiry_Canceled
Inquiry_Error
Command Parameters
Examples
Comments
Max Period Length
10
Range: 0x03 – 0xFFFF
Min Period Length
9
Range: 0x02 – 0xFFFE