Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 294)

276
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
HCICatcSetBdAddr
HCICatcSetBdAddr(Address)
Return value
• "Success"
• "Failure"
Comments
The command will set the value of the local Bluetooth device address.
Example
Address = ‘010203040506’;
result = HCICatcSetBdAddr(Address);
Trace(Address);
HCICatcEnterTestMode
HCICatcEnterTestMode()
Return value
• "Success"
• "Failure"
• "Failed: Device not found"
• "Not Connected"
Comments
This command causes sending LMP_Test_Activate PDU from the Tester to
the DUT.
Example
Devide = ‘010203040506’;
result = HCICatcEnterTestMode(Device);
Trace(result);
Parameter Meaning Default Value Comments
Address
Parameter Meaning Default Value Comments
Device