Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 226)

208
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
Used in Test Cases
HCIWriteAuthenticationEnable
HCIWriteAuthenticationEnable(AuthenticationEnable)
Return value
• “Success”
• “Failure”
• “Invalid parameter”
Comments
Controls whether the local device is required to authenticate the remote
device at connection setup.
Example
result = HCIWriteAuthenticationEnable(0);
HCIWriteAutomaticFlushTimeout
HCIWriteAutomaticFlushTimeout(Address, FlushTimeout)
Test Case
TP/LIH/BV-61-C
TP/LIH/BV-64-C
Parameter Meaning Default Value Comments
AuthenticationEnable Authentica-
tion value:
0 = Authenti-
cation dis-
abled;
1 = Authenti-
cation enabled
for all connec-
tions;
2-255 =
Reserved
0
Parameter Meaning Default Value Comments
Address