Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 289)

271
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
ErrorType
Return value
• "Success"
• "Failure"
• "Invalid Parameter"
Used in Test Cases
Example
#
# HCI_CatcAcceptConnectionExt
#
Main()
{
TestScenario = 1;
0x0000 No error
0x0001 Send NULL packets with NAK as the response to the incoming data packets
0x0002 Implicit NAK. No response to the incoming data packets.
0x0004 Uncorrectable FEC 1/3 header error injection
0x0008 Uncorrectable FEC 2/3 payload error injection
0x0010 FLOW control bit set to 0. NAK bit is set as well.
0x0020 FLOW control bit set to 0. NAK bit is set as well.
Implicit GO.
0x0040 Same SEQN value
0x0080 Wrong UAP
0x0100 Deadlock avoidance according to the LMP test case TP/LIH/BV-81-C
Test Case
TP/PHYS/TRX/BV-04-C
TP/PROT/ARQ/BV-14-C
TP/PROT/ARQ/BV-15-C
TP/PROT/ARQ/BV-16-C
TP/PROT/ARQ/BV-18-C
TP/PROT/ARQ/BV-19-C
TP/PROT/ARQ/BV-23-C
TP/PROT/CON/BV-08-C