Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 183)

165
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
Example
Main()
{
Device = '008037163567';
result = HCICatcTimingAccuracyRequest(Device);
Trace("HCICatcTimingAccuracyRequest: ", result, "\n");
if(result[0] == "Success")
{
Trace("Drift: ",result[1], " (ppm)\n");
Trace("Jitter: ",result[2], " (ppm)\n");
}
return result;
}
HCICatcWriteEncryptionKeySize
HCICatcWriteEncryptionKeySize(KeySize)
Return value
Returns a list with two values: status and KeySize
Status (element 0) is one of the following:
• "Success"
• "Failure"
• "Invalid Parameter"
Comments
Write the size of the encryption key that is going to be used during an
encryption process
Example
KeySize = 7;
result = HCICatcWriteEncryptionKeySize (KeySize);
Trace(result);
HCICatcWriteLinkKeyType
HCICatcWriteLinkKeyType(KeyType)
Parameter Meaning Default Value Comments
KeySize Value can be from 1 to 16
Parameter Meaning Default Value Comments
KeyType
Can be:"Combinational" or "Unit"