Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 174)

156
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
Return Events
• Command Status event will return after the operation has started
• Command Complete: Will return after the operation has been com-
pleted.
Comment
This command will send LMP_Page_Mode_Req PDU to the remote device
Used in Test Cases
HCICATCPageScanModeRequest
HCICATCPageScanModeRequest(HCI_Handle,PagingScheme,Pagin
gSchemeSettings)
Return Events
• Command Status event will return after the operation has started
• Command Complete: Will return after the operation has been com-
pleted.
Comment
This command sends LMP_Page_Scan_Mode_Req PDU to the remote device.
Used in Test Cases
Test Case
TP/LIH/BV-65-C
TP/LIH/BV-66-C
Parameter Values Description
HCI_Handle
2 Bytes
PagingScheme According to the LMP_Page_Scan_Mode_Req PDU in
the Bluetooth 1.1 HCI specification
PagingSchemeSettings According to the LMP_Page_Scan_Mode_Req PDU in
the Bluetooth 1.1 HCI specification
Test Case
TP/LIH/BV-70-C