Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 292)

274
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
ErrorType
Return value
• "Success"
• "Failure"
• "Invalid Parameter"
• "Already connected"
• "Timed out"
Example
#
# HCI_CatcCreateConnectionExt
#
Main()
{
Device = '008037163567';
PacketType = ["DM3"];
PageScanRepetitionMode = 0x0;
PageScanMode = 0x0;
ClockOffset = 0;
AllowRoleSwitch = 1;
NumberOfPackets = 1000;
TimeLength = 0;
Data = 0x010203;
ErrorType = 0x0000;
ErrorMask = 0x0000;
3 L_CH = 11 - LMP
Message
0x0000 No error
0x0001 FEC 1/3 -- uncorrectable packet header
0x0002 FEC 2/3 -- uncorrectable payload.
Special case is for DV payload
0x0004 Explicit NAK
0x0008 SEQN. See TP/PROT/ARQ/BV-18-C test case
0x0010 FLOW control
0x0020 Same SEQN value. See TP/PROT/ARQ/BV-23-C test case
0x0040 Wrong UAP
0x0080 Wrong AM_ADDR of the slave
0x0100 Deadlock avoidance according to the LMP test case TP/LIH/BV-81-C