Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 177)

159
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
Trace("HCICatcQoSResponse: ", result , "\n");
}
HCICatcReadHeadsetGain
HCICatcReadHeadsetGain(Device)
Return values
Returns a list with two values: status and gain.
Status (element 0) is one of the following:
• “Success”
• “Failure”
• “Not found”
• “No SCO connection”
Gain (element 1) is the one-byte value of the headset gain. Range is 0 to 15.
Comments
This command is used to read current gain of connected speaker or micro-
phone. In order to use this command, an SCO connection must exist.
Example
See the example for the HCICatcChangeHeadsetGain command.
HCICatcReadEncryptionKeySize
HCICatcReadEncryptionKeySize()
Return value
Returns a list with two values: Status and KeySize
Status Return
• "Success"
• "Failure"
Parameter Meaning Default Value Comments
Device Speaker or
microphone
Values: “Speaker”, “Microphone”
Parameter Meaning Default Value Comments
N/A