Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual - Manual (Page 179)

161
CATC BTT RAINER 2.11 C HAPTER
User’s Manual
Return
• Command Status will return after the operation has started.
• Command Complete will return after the operation has completed
Comment:
This command will send data over SCO connection with injected errors
according to the test case.
HCICATCSCOParameterChangeResponse
HCICATCSCOParameterChangeResponse(Mode)
Return Events
Command Complete will return after the operation has been completed.
Comment
This command will configure the local device to accept or reject an incom-
ing request to change SCO parameters.
Used in Test Cases
Example
Main()
{
Mode = "Reject";
result = HCICatcScoParameterChangeResponse(Mode);
Trace("HCICatcScoParameterChangeResponse: ", result ,
"\n");
Mode = "Accept";
result = HCICatcScoParameterChangeResponse(Mode);
Trace("HCICatcScoParameterChangeResponse: ", result ,
"\n");
Parameter Values Description
Mode 1 -- Accept (default)
0 -- Reject all incoming parameter
change
2 - 0xFF reserved
Test Case Description
TP/LIH/BV-56-C Required to reject incoming SCO parameters change