A.2.4 set_park_mode, A.2.5 qos_setup, Set_park_mode qos_setup – Teledyne LeCroy BTTracer_Trainer - BTTrainer Users Manual User Manual
Page 95: Places the specified acl link into park mode
77
CATC BTT
RAINER
2.20
A
PPENDIX
A
User’s Manual
A.2.4 Set_Park_Mode
Places the specified ACL link into Park mode.
A.2.5 QoS_Setup
Used to specify Quality of Service parameters for a connection handle.
Max_Interval
0xFFFF
0x0001 - 0xFFFF
Min_Interval
0x01
0x0001 - 0xFFFF
Return Events
Mode_Change
Hold_Mode_Error
Command Parameters
Examples
Comments
HCI_Handle
0x0001
Beacon_Max_Interval
0xFFFF
0x0001 - 0xFFFF
Beacon_Min_Interval
0x01
0x0001 - 0xFFFF
Return Events
Mode_Change
Park_Mode_Error
Command Parameters
Examples
Comments
HCI_Handle
0x0001
ServiceType
0x01
0=No traffic;
1=Best effort;
2=Guaranteed
TokenRate
0
Token rate in Bytes/second
PeakBandwidth
0
Bytes per second
Latency
0xFFFFFFFF
In microseconds
DelayVariation
0xFFFFFFFF
In microseconds
Return Events
Quality_of_Service_Setup_Complete
Quality_of_Service_Setup_Error
Command Parameters
Examples
Comments