Yokogawa AXFA14G/C - Manual (Page 26)

IM 01E20F12-01E 5-2
5. EXPLANATION OF BASIC ITEMS
Table 5.2.1 Navigation tree structure of online parameters
T0501.eps
Level of node
1st level 2nd level 3rd level
Process Variable
Device Status
Diag and Service
Easy Setup
Calibration
Physical Block Identification
Diagnosis
Simulate
Diagnosis
Function Block
Status
Configuration
Input Transducer
Block Flow Tube
DI Set
AUX
Mask Alarm
Simulate Measured
Value
Adhesion
Alarm Record
Local Display
Output Analog Input Batch Information
PV Scale
Output scale
Warning and Alarm
Batch Information Totalizer 1
Totalizer Reset
Warning and Alarm
Batch Information Totalizer 2
Totalizer Reset
Warning and Alarm
Batch Information Totalizer 3
Totalizer Reset
Warning and Alarm
Batch Information Discrete Input 1
Batch Information Discrete Input 2
Device
This menu shows the current accessible functions of
the DTM for AXF ([Device] menu).
Table 5.2.2 DTM context menu for AXF
T0502.eps
DTM Function
1st level 2nd level Description
Connect/
Disconnect Connect/Disconnect
Parameter Online
Parameter Online Parameterization
Offline
Parameter Offline Parameterization
Configuration The Query Device is
located under Configuration.
The Query Device provides
a list of all parameters in
a designated block.
Additional
Functions Indicates actual process
conditions.
All parameters must be
handled as dynamic
variables and updated
periodically. Observe
Diagnosis Provides device diagnosis
information.
Process
Trend Trend display of process
value
Register Device
Maintenance Info
About Displays DTM version of
the device
Refresh (reload) the
online data
Registration of a new
device maintenance
information based on the
device information
Unregisters the device
maintenance information Unregister Device
Maintenance Info
All parameters are uploaded
from device to DTM. Upload from
Device
All parameters are
downloaded from DTM to
device. Download to
Device
Print Print specified parameter
sets.
Document Displays the related
document for DTM (*1)
Displays DTM version of
the device Property
Refresh
Online Data
*1: The AXF does not have this function.
Example of DTM context screen
There are 8 kinds of menus as [Process Variable],
[Device Status], [Diag and Service], [Easy Setup],
[Calibration], [Physical Block], [Input] and [Output].
Their examples are shown in Figure 5.2.2 to 5.2.6.