Yokogawa AXFA14G/C - Manual (Page 59)

IM 01E20F12-01E 9-1
9. PARAMETER LISTS
9. PARAMETER LISTS
Note The Write Mode column indicates the mode in which the parameter is write enabled.
O/S: Write enabled in O/S mode.
MAN: Write enabled in manual mode.
AUTO:Write enabled in auto mode, manual mode, and O/S mode.
–:
Read only.
9.1 Physical Block Parameter List (Slot 0)
T0901-1.EPS
Index Parameter Valid Range Initial Value Description
Write
Mode
16 BLOCK_OBJECT Information on this block such as Block Tag, DD Revision, Execution
Time etc. –
17 ST_REV 0 The revision level of the static data associated with the function block.
The revision value will be incremented each time a static parameter
value in the block is changed. –
18 TAG_DESC Specified at
the time of
order The user description of the intended application of the block. Auto
19 STRATEGY 0 The strategy field can be used to identify grouping of blocks.
This data is not checked or processed by the block. Auto 0 to 65535
20 ALERT_KEY 0 The identification number of the plant unit.
This information may be used in the host for sorting alarms, etc... Auto 0 to 255
21 TARGET_MODE Auto Set the Target of block mode (MODE_BLK) to Auto or O/S according
to the Write Mode of the parameter to be set or changed. Auto The permitted bit
is only available.
22 MODE_
BLK
(DS-37) Auto The mode parameter is a structured parameter composed of the
actual mode, the normal mode and the permitted mode.
Actual: Indicates the current operating condition.
Permit: Indicates the operating condition that the block is allowed to take.
Normal: Indicates the operating condition that the block will usually take.
– Actual
O/S, Auto – Permitted O/S, Auto bit
Auto – Normal The permitted bit
is only available.
23 ALARM_
SUM
(DS-42) 0 The current alert status, unacknowledged status, unreported status
and disabled status of the alarms associated with the function block. – Current
0 for future use – Unacknowledged
0 for future use – Unreported
0 for future use – Disabled
Bit7 is only
available.
24 SOFTWARE_REVISION Revision-number of the software of the field device. –
25 HARDWARE_REVISION Revision-number of the hardware of the field device. –
26 DEVICE_MAN_ID 55 (0x37) Identification code of the manufacturer of the field device. –
27 DEVICE_ID AXF Manufacturer specific identification of the field device. –
28 DEVICE_SER_NUM Serial No. Serial number of the field device. Auto
29 DIAGNOSIS 0 Detailed information of the device, bitwise coded. More than one
message possible at once. –
30 DIAGNOSIS_EXTENSION 0 Additional manufacturer-specific information of the device, bitwise
coded. –
31 DIAGNOSIS_MASK 0: Not supported
1: Supported 1: Supported Definition of supported DIAGNOSIS information-bits. –
32 DIAGNOSIS_MASK_
EXTENSION 0: Not supported
1: Supported 1: Supported Definition of supported DIAGNOSIS_EXTENSION information-bits. –
33 DEVICE_CERTIFICATION No information Space Not used for ADMAG AXF –
34 WRITE_LOCKING 0: Lock
2457: Disabled 2457 (0x999) If set, no writes from anywhere are allowed, except to clear
WRITE_LOCKING. Auto