Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 1096)

1066 Fabric OS Command Reference
53-1003131-01
snmpConfig
2
sysContact
The contact information for this system (switch). The default value is Field
Support. Refer to the definition of sysDescr, sysLocation and sysContact in the
system group of MIB-II. The string must be at least 4 characters in length; the
maximum length is 255 characters.
authTraps
When enabled, the authentication trap (authenticationFailure) is transmitted to a
configured trap recipient in the event that the agent receives a protocol message
that is not properly authenticated. In the context of SNMPv1 and SNMPv2c, this
means that a request contains a community string that is not known to the agent.
The default value for this parameter is 0 (disabled).
Security Level Parameters
The --show option displays the current SNMP GET security and SNMP SET security levels. Use --set
secLevel to modify existing settings:
SNMP GET security level
Specifies security level for all SNMP GET requests.
SNMP SET security level
Specifies security level for SNMP SET requests only. Values include the following:
0
No security.
1
Authentication only.
2
Authentication and Privacy.
3
OFF
EXAMPLES
To display the SNMPv1 configuration:
switch:admin> snmpConfig --show snmpv1
SNMPv1 community and trap recipient configuration:
Community 1: Secret C0de (rw)
Trap recipient: 10.32.147.113
Trap recipient Severity Level: 0
Community 2: OrigEquipMfr (rw)
Trap recipient: 1080::8:800:200C:1234
Trap recipient Severity Level: 0
Community 3: private (rw)
No trap recipient configured yet
Community 4: public (ro)
No trap recipient configured yet
Community 5: common (ro)
No trap recipient configured yet
Community 6: FibreChannel (ro)
No trap recipient configured yet
To set the SNMPv1 configuration of a switch:
switch:admin> snmpConfig --set snmpv1
SNMP community and trap recipient configuration:
Community (rw): [Secret C0de]
Trap Recipient's IP address: [0.0.0.0] \
1080::8:800:200C:1234
Community (rw): [OrigEquipMfr]
string size must be between 2 and 16 - please re-enter