Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 68)

38 Fabric OS Command Reference
53-1003131-01
ag
2
To set and display failback policy settings on a single port:
switch:admin> ag --failbackenable 0
Failback policy cannot be enabled since failover
policy is disabled for port 0
switch:admin> ag --failbackenable 2
Failback policy is enabled for port 2
switch:admin> ag --failbackenable 3
Failback on N_Port 3 is not supported
switch:admin> ag --failbackenable 2
Failback on N_Port 2 is supported
Port Group commands
To display Port Group information:
switch:admin> ag --pgshow
PG_ID PG_Name PG_Mode N_Ports F_Ports
-----------------------------------------------
0 pg0 lb,mfnm 1;3 10;11
2 SecondFabric - 0;2 4;5;6
-----------------------------------------------
To create a port group "FirstFabric" that includes N_Ports 1 and 3 and has login balancing enabled:
switch:admin> ag --pgcreate 3 "1;3" -n FirstFabric1 -m "lb"
Port Group 3 created successfully
switch:admin> ag --pgshow
PG_ID PG_Name PG_Mode N_Ports F_Ports
-----------------------------------------------
0 pg0 lb,mfnm none none
2 SecondFabric - 0;2 4;5;6
3 FirstFabric lb 1;3 10;11
-----------------------------------------------
To rename the port group with pgid 2 to "MyEvenFabric":
switch:admin> ag --pgrename 2 MyEvenFabric
Port Group 2 has been renamed as MyEvenFabric successfully
switch:admin> ag --pgshow
PG_ID PG_Name PG_Mode N_Ports F_Ports
-----------------------------------------------
0 pg0 lb,mfnm none none
2 MyEvenFabric - 0;2 4;5;6
3 FirstFabric lb 1;3 10;11
-----------------------------------------------