Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 200)

170 Fabric OS Command Reference
53-1003131-01
configureChassis
2
To change the CS_CTL-based frame prioritization to default mode (one-to-one mapping):
switch:admin> configurechassis
Configure...
cfgload attributes (yes, y, no, n): [no]
Custom attributes (yes, y, no, n): [no]
system attributes (yes, y, no, n): [no]
fos attributes (yes, y, no, n): [no] y
CSCTL QoS Mode (0 = default; 1 = auto mode): (0..1) [1] 0
SEE ALSO
configDefault , configShow , chassisEnable , chassisDisable , configure , ipAddrSet ,
portCfgLongDistance , switchDisable , switchEnable , upTime