Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 913)

Fabric OS Command Reference 883
53-1003131-01
portShow
2
portShow
Displays status and configuration parameters for ports and GbE ports.
SYNOPSIS
portshow [slot/][ge]port
portshow [slot/]port -link [-force]
portshow -i [ index1 [-index2] [...]] [-f]
portshow -pid pid
portshow -x [hex1[-hex2] [...]]
portshow option [slot/]ge_port [optional_args]
portshow option [all | ve_port] arguments
[optional_arguments]
portshow option [all |ge_port] arguments
[optional_arguments]
DESCRIPTION
Use this command to display general port status and specific configuration parameters for a specified
port, GbE port, or VE_Port.
If this command is executed for a specified port with no additional options, it displays general status and
configuration for that port. If executed with optional arguments for a Gigabit Ethernet (GbE) port or
VE_Port, the command displays FCIP-related port configuration parameters specific to the Brocade
7800, Brocade 7840 switches and the Brocade FX8-24 blade.
The behavior of this command is platform-specific. Some command options are not available on all
platforms. Use the following section headings to navigate this page.
•
Display general port status information on all platforms
• Display IP Interface configurations on the Brocade 7800, 7840, or FX8-24 platforms:
- portshow ipif - Displays the local IP interfaces.
- portshow arp - Displays the content of the address resolution protocol (ARP) table.
- portshow iproute - Displays static routes on the IP interface.
-
portshow vlantag - Displays the IP interface VLAN configuration.
-
portshow ipsec-policy - Displays the IPSEC Policy information. Currently supported on
Brocade 7840 switch only.
• Display FCIP tunnels, circuits, management interfaces and FICON statistics on the Brocade 7800,
7840, or FX8-24 platforms:
- portshow fciptunnel - Displays Fibre Channel over IP (FCIP) tunnels.
- portshow fcipcircuit - Displays FCIP circuits.
- portshow mgmtif - Displays the inband management interfaces.
- portshow mgmtroute - Displays the routes for the inband management interfaces.
-
portShow xtun - Displays FICON and FCP emulation statistics and current runtime conditions.
To display the command usage on the switch, use portShow [action].