Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 137)

Fabric OS Command Reference 107
53-1003131-01
cfgEnable
2
switch:admin> cfgtransabort 271010736
switch:admin> cfgenable "USA_cfg"
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected. If the update includes changes
to one or more traffic isolation zones, the update may result in
localized disruption to traffic on ports associated with
the traffic isolation zone changes
Do you want to enable 'USA_cfg' configuration \
(yes, y, no, n): [no] y
zone config "USA_cfg" is in effect
Updating flash ...
SEE ALSO
cfgClear , cfgDisable , cfgSave , cfgShow