Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) User Manual

Page 394

Advertising
background image

364

Fabric OS Command Reference

53-1003131-01

fcrXlateConfig

2

--show stalexd [importedFID]

Displays stale translate domains associated with the specified Fabric ID (1-128).
A translate domain becomes stale when the remote edge fabric for which this
translate domain was created in the specified edge fabric becomes unreachable.
When issued without specifying an imported FID, this command lists all stale
translate domains in all edge fabrics connected to the FCR.

--delete stalexd importedFID staleXlateDomainID

Deletes the specified stale translate domain from the edge fabric specified by its
fabric ID. This command must be executed in the FCR that owns the stale
translate domain.

EXAMPLES

To display the translate domain configuration and the state of the persistxd parameter:

switch:admin> fcrxlateconfig

ImportedFid ExportedFid Domain OwnerDid XlateWWN

001 002 004 000001 N/A

001 005 003 N/A N/A

Persist XD state: Enabled

To set the preferred domain ID of the translate domain created in fabric 2, which represents the remote
fabric 3, to a value of 8:

switch:admin> fcrxlateconfig 2 3 8

xlate domain already configured, overwrite?(n) y

To clear the preferred domain ID of the translate domain created in fabric 2, which represents remote
fabric 3:

switch:admin> fcrxlateconfig -r 2 3

xlate domain deleted

To enable translate domain persistence:

fcr:admin> fcrxlateconfig --enable persistxd

Persist XD is enabled

To disable translate domain persistence:

fcr:admin> fcrxlateconfig --disable persistxd

Persist XD is disabled

To identify and remove stale translate domains in a single backbone multiple FCR configuration:

fcr:admin> fcrxlateconfig --show stalexd

Imported FID Stale XD Owner Domain

--------------------------------------------------

012 002 007 ( this FCR )

013 002 001 ( other FCR )

To remove the stale translate domain (only the translate domain owned by the current owner can be
removed; note that trailing zeros must be removed from the FID and Xlate domain ID.>):

fcr:admin> fcrxlateconfig --delete stalexd 12 2

Xlate domain 2 is deleted

SEE ALSO

portCfgEXPort

,

portCfgVEXPort

,

portDisable

,

portEnable

,

portShow

Advertising