Brocade Fabric OS Command Reference (Supporting Fabric OS v7.3.0) - Manual (Page 205)

Fabric OS Command Reference 175
53-1003131-01
cryptoCfg
2
cryptocfg --initnode
cryptocfg --initEE [slot]
cryptocfg --regEE [slot]
cryptocfg --enableEE [slot]
cryptocfg --disableEE [slot]
cryptocfg --export -scp -dhchallenge vault_IP_address |
-currentMK | -KACcert | -KACcsr | -CPcert
host_IP host_username host_file_path
cryptocfg --export -usb -dhchallenge vault_IP_address |
-currentMK | -KACcert | -KACcsr | -CPcert dest_filename
cryptocfg --import -scp local_name host_IP host_username
host_file_path
cryptocfg --import -usb dest_filename source_filename
cryptocfg --reg -membernode member_node_WWN
member_node_certfile Member_node_IP_addr
cryptocfg --dereg -membernode member_node_WWN
cryptocfg --dhchallenge vault_IP_addr
cryptocfg --dhresponse vault_IP_addr
cryptocfg --zeroizeEE [slot]
cryptocfg --delete -file local_name
cryptocfg --reg -KAClogin primary | secondary
cryptocfg --show -file -all
cryptocfg --show -localEE
cryptocfg --rebalance [slot]
cryptocfg --kvdiag [-enable | -disable | -show]
[-interval interval] [-type type]
DESCRIPTION
Use the node configuration commands to perform node initialization and configuration tasks. Node
initialization and configuration must be performed on every node. A node is an encryption switch or a
chassis containing one or more encryption blades. A node is identified by the switch IP address or switch
WWN, which is subsequently referred to as the "node WWN." The node configuration commands include
the following functions:
•
Node initialization and certificate generation.
• Certificate export and import to and from a specified host or USB device.
• Enabling or disabling an encryption engine (EE).
• Encryption group member node and group leader registration.